安全黑客
当前位置:安全黑客文章资讯设计学堂DW设计
日期:2012-09-08 23:44:00  来源:本站整理

Devexpress 10.1.6 Devexpress编译及源代码下载[DW设计]

赞助商链接



  本文“Devexpress 10.1.6 Devexpress编译及源代码下载[DW设计]”是由安全黑客为您精心收集,来源于网络转载,文章版权归文章作者所有,本站不对其观点以及内容做任何评价,请读者自行判断,以下是其具体内容:

费了垂老的劲,终于七拼八揍的,把Devexpress编译所需的东西全部下载到手

1、 DXperience Universal-10.1.6安装包,这个是190多M的
 

下载地址:http://downloads.devexpress.com/63be3ab2-a882-4af8-bf95-6ee2ba8af6bb/64.237.51.130/DXperience/2010.1/6/DXperienceUniversal-10.1.6.exe

这个是官方的链接假如失效的话,可以按文件名去别的地方下载.

2、源代码(最重要的东东了,我为找这个东西还真是跋山渡水,跋山渡水,辛劳啊.)

http://rapidshare.com/files/416091676/DX2010.1.6.Sources.rar.html
解压密码: allcredits_JFX
http://rapidshare.com/files/416119124/DXXAF2010.1.6.Sources.rar.html
解压密码: allcredits_JFX 

我是搞Winform的,只下载了第一个就编译成功了(70左右M).我用DEV时间还不长,不知道第二个包是做什么用的.

 举荐利用一个叫JDownload的下载工具来下载,会对比快.

3、编译脚本,这东东,我真在网上找了大半天,找到最后我这个烂英语预计也能过四级了(E文资料看得太多了)

 终究我是用10.1.4版本的编译脚本来编译的,我预计10.1版本的编译包应当都是通用的吧.猜的哦

 下载地址:http://files.cnblogs.com/shaoming01/Devexpress_10.1.4(10.1.5%2c10.1.6)_%e7%bc%96%e8%af%91%e8%84%9a%e6%9c%ac_Build_Scripts.rar


 

以上就是要预备的质料,都预备好了,那就按照下面的步骤一步一步来吧.

How to Build Form Source Code?

1. Install the trial (download from the official website) Note: Install ALL parts of the setup, even if you do not need it
2. Now extract the sources (provided by our good friends here, bless them) to the {Install folder}\Components\Sources folder
(By sources I mean all the folders starting with DevExpress.{something}
3. Extract the build scripts (all the *.bat, *.cmd and the PatchInternalVisibleTo stuff) to the {Install folder}\Components\Sources folder
4. Now open defines.bat in some text editor like Notepad
5. Set the version of VS you are using first (in the vsver=vs2008 line)
6. Also, I like to set the configuration variable to Release instead of Debug
7. Path editing: The basic idea here is to verify that all paths mentioned in the file are valid for your system. eg. if you have Windows 32bit, the Programfiles32bit variable should point to c:\program files
8. Check all paths and make sure they are valid for your system. I found a few differences on mine :

  1. set sn="%ProgramFiles64bit%\Microsoft SDKs\Windows\v6.0A\Bin\sn.exe"
  2. should be
  3. set sn="%ProgramFiles64bit%\Microsoft SDKs\Windows\v7.0A\Bin\sn.exe"

and in vs2010 section

  1. set gacutil="%ProgramFiles32bit%\Microsoft SDKs\Windows\v7.0A\Bin\NETFX 4.0 Tools\x64\gacutil.exe"
  2. should be
  3. set gacutil="%ProgramFiles32bit%\Microsoft SDKs\Windows\v7.0A\Bin\NETFX 4.0 Tools\gacutil.exe"

9. The bottom of the file is divided into different sections for each version of VS. You only need to check the paths for the version of VS you have
10. If you have trouble finding the correct path for any variable, just search your c: drive for the file the path is referring.
11. Check your changes, save and close the file
12. Now open a command prompt and navigate to the {Install folder}\Components\Sources folder
13. Run clear.bat
14. Open the c:\windows\assembly folder
15. If you find any assemblies starting with DevExpress, remove them. If you have installed the IDE tools, there will be assemblies like DevExpress.DXCore, DevExpress.Refactor, DevExpress.CodeRush - do NOT remove them. I usually install the IDE tools after finishing with the components to avoid any confusion.
16. Open the {Install folder}\Components\Sources\DevExpress.DLL folder and delete any remaining files from it.
17. Ready to compile! In the command prompt window (the one used for running clear.bat) run buildall.cmd (and pray )
18. In the output, all yellow msgs are warnings and can be ignored. The red ones are errors. You might get a few of these (3/4) if you have not installed ASP.NET. Other than that, there should NOT be any errors.
If you get a lot of errors, something is probably wrong with the edits you made in the defines.bat. Stop the build, and recheck.
19. After successfully completing the build, run the ToolBox creator from the DevExpress group in the Start menu. Do NOT run ToolBoxCreator.exe directly.
20. In {Install folder}\Components\Sources folder there will be a file called PublicKeyToken.txt, open it in a text editor and copy the key to the clipboard.
21. Run the ProjectConverter tool from the Start menu, click the Show advanced options check box, past the public key in the Custom public key box
22. Point the Project folder to you solutions folder and convert all your projects.
23. Good to go!

上面的E文对比简单,翻译没什么意思,还是原汁原味吧. 步骤固然看起来对比多,不过操作对比简单
反正我也是按照这个来的,终究是成功了,相信你也行的.


  以上是“Devexpress 10.1.6 Devexpress编译及源代码下载[DW设计]”的内容,如果你对以上该文章内容感兴趣,你可以看看安全黑客为您推荐以下文章:
  • Devexpress 10.1.6 Devexpress编译及源代码下载
  • ubuntu下安装Kdevelop和qt4
  • JBuilder和JDeveloper的简单比较
  • JDeveloper构建Struts操纵程序
  • 如安在JDeveloper 10g中操纵JSF
  • Java技术,IBM气势: IBM Developer Kit简介
  • 全面解析Oracle developer的非常处理机制-入门底子
  • iPhone game developer
  • 本文地址: 与您的QQ/BBS好友分享!

    文章评论评论内容只代表网友观点,与本站立场无关!

       评论摘要(共 0 条,得分 0 分,平均 0 分) 查看完整评论
    免责条款 - 广告合作 - 下载声明 - 欢迎投稿 - 友情连接 - 网站地图 -
    Copyright © 2012-2013 www.110hack.com. All Rights Reserved .